Feb 17, 2021
Structural features of worm gear reducer:
A large transmission ratio can be obtained, which is more compact than the cross-shaft helical gear mechanism.
The meshing tooth surfaces of the two wheels are in line contact, and its load-bearing capacity is much higher than that of the cross-axis helical gear mechanism.
worm drive is equivalent to spiral drive, which is multi-tooth meshing transmission, so the transmission is stable, the noise is low, and it is self-locking.
Four points to note:
The worm gear reducer must be installed correctly to ensure the normal operation of the system.
The assembly of the input end and output end of the reducer must be concentric.
Try not to install the reducer vertically.
Pay attention to the lubricant replacement time.
Previous: No Information