Gearing Arrangement: Worm
Output Torque: 6-6050N.m
Rated Power: 0.18-15kw
Input Speed: 1500rpm
Worm Gear Speed Reducer WPKS
Place of Origin
WPKS worm gear speed reducer
Green, blue, golden, gray, red and so on
Footed mounted,flange mounted
Quality Control System
IEC flange for mounting motor,solid
Solid shaft, hollow shaft
notice of installation
1. The base-plate must be plane and stoutness and the base-plate must be screwed down and shock proof.
2. The connecting shaft of prime mover, reducer and operation device must be coaxial installation.
3. The diameter tolerance zone of input and output shaft is H6, the holes of fittings such as couplings, sprocket wheel and so on.its must properly mate the shaft, which prevents bearing from breakage because of over-loose mate.
4. Drivers such as sprocket wheel and gear must be fitted close to bearings in order to reduce bending stress of hanging shaft.
Notice Of Usage
1. Check carefully whether the reducer model , distance, ratio, input connecting method , output shaft structure, input and output shaft direction and revolving direction accord with required before using,
2. Please fill proper category and brand lubricant according to the requirement of selecting lubricant oil in the product manual. And then screw on the vent-plug, unlock the small cone-plug of vent-plug. Only after doing these, reducer is already for starting up running. The proper brand and adequate lubricant oil is required, replace oil in time conforming to the request of product manual is also necessary, especially after using first 100hours, it is required refilling new oil.
3. When abnormal circumstances occur, please check and stop reducer per solutions and reasons for faults of reducer(allowable highest oil temperature is 95 under this temperature limit, if oil temperature no more goes up, please let reducer continue running).
Worm gear speed reducer
Blue/Silver Or On Customer Request
Housing: Die-Cast Iron cast
Worm-20CrMn Ti with carburizing and quenching, surface harness is 56-62HRC
Carton and Wooden Case
Industrial Machine: Food Stuff, Ceramics, CHEMICAL, Packing, Dyeing,
56B14, 63B14, 63B5, 63B5, 71B14,80B14 AND SO ON